Technological tasks
The Tech-tasks module is tasks related to the development, implementation and improvement of new technologies, products and processes. If you have development, implementation and other needs you can post information below.
Intercolumn pressure
In one well at a certain depth there is inter-casing pressure (ICP), which can lead to collapse of the production string and the appearance of griffins.
Making decisions before ...
до 16.07.24
Область задачи
Information processing and transformationNumber of applications
0
Application of fiberglass pipes inside the CPP
Increased rates of wear, corrosion and deposits of the pipeline leading to a large number of leaks and accidents, large heat losses of the pipeline and high operating costs for insulation and heating, all of this leads to high operating costs, including frequent and expensive repairs leading, in addition to all, to equipment downtime. Protecting a pipeline by lining is a very expensive and short-lived process in the case of a high content of mechanical impurities and does not exclude the cost of heat loss. One of the ways to increase the efficiency of a pipeline is the use of composite pipelines, but at the moment there is no regulatory framework for the use of fiberglass pipes and fittings at CPP facilities.
Making decisions before ...
до 28.06.24
Область задачи
Labor protection, industrial safety, environmental protection and production operationsNumber of applications
0
Introduction of new technologies and dosing technologies to combat corrosion
Corrosion of pipelines and process equipment, caused by the peculiar composition of oil and water in the field, as well as the peculiarity of technological regimes, leads to negative consequences such as pipeline breaks and leaks, as well as shutdowns of technological processes during repairs. In addition to pipeline corrosion, corrosion of process dynamic equipment and protective equipment also leads to negative consequences. To improve the efficiency of an oil field, it is necessary to improve corrosion prevention and corrosion control methods. Determination of the reasons for the formation of corrosion of surface equipment of the collection system on surface oil field equipment of the Central Processing Station and Central Processing Station.
Making decisions before ...
до 27.06.24
Область задачи
Labor protection, industrial safety, environmental protection and production operationsNumber of applications
0
Image control
For a diagnostic center specializing in CBCT (3D diagnostics), it is necessary to introduce control over the number of images to eliminate the factor of theft of x-ray laboratory technicians.
Making decisions before ...
до 15.07.24
Область задачи
Intelligent control systemsNumber of applications
1
Подбор оборудования и технологии для подготовки технологической жидкости для обессоливания нефти
применение пресной воды для производственных нужд и как следствие-вода, изменившая первоначальные свойства-сточная и необходим расчет нормативов ПДС.
Making decisions before ...
до 31.07.24
Область задачи
Labor protection, industrial safety, environmental protection and production operationsNumber of applications
0
Анализ содержания сульфатвосстанавливающие бактерии (СВБ) в воде и сероводорода в попутно-добываемом газе
Заражение пласта сульфатовостанавливающими бактериями (СВБ) приводит к активному росту коррозионной активности процессов добычи, а также способствует повышению возникновения механических примесей что так же дает негативный эффект стимулируя образования нефтяных эмульсий. Таким образом возникновения в пласте СВБ негативной влияет и усиливает негативный эффект на добычу в целом стимулируя процессы коррозии и образования эмульсий. Борьба с СВБ необходима в виде как более качественной подготовки пластовой воды, так и применения бактерицидов для закачки в системы ППД. Эффективность закачки бактерицидов для борьбы с сульфатвосстанавливающие бактерии (СВБ) в воде и сероводорода в попутно-добываемом газе.
Making decisions before ...
до 30.06.24
Область задачи
Labor protection, industrial safety, environmental protection and production operationsNumber of applications
0
Corrosion at the Gas Treatment Plant due to SGM (steam-gas mixture)
The formation of corrosion in the pipe supplying the gas mixture to the compressor, due to the hydrogen sulfide content of up to 3.2% and high temperatures of 200 C. The main causes of corrosion are wet gas, the presence of aggressive gases and temperature changes.
Making decisions before ...
до 16.07.24
Область задачи
Energy conversion and storageNumber of applications
0
Cleaning wells from proppants after hydraulic fracturing (HF)
After the operation is completed, the proppant is squeezed back into the well.
Making decisions before ...
до 16.07.24
Область задачи
Field and well development managementNumber of applications
0
Research into the causes and conditions of the occurrence of TRNE (hard-to-break oil emulsion) in the field and the search for technological solutions that prevent the occurrence of TRNE, as well as the development of solutions for its destruction and further disposal. Study of the conditions for the formation of difficult-to-break oil emulsions in the field and methods of combating its formation and developing recommendations for its destruction
In the process of transport production and oil preparation in the field, the process of formation of oil emulsions occurs caused by transient dynamic processes in pipelines and the transport system, chemical processes in all technological cycles of the oil field, including those caused by conflicts of residual doses of chemical reagents in various technological cycles, transient thermodynamic preparation processes oil, and changing parameters and composition of produced oil. The emulsion that appears at different cycles due to the peculiarity of the oil composition and the content of resins and asphaltenes in it, as well as the high salinity of formation water, in combination with mechanized production and other dynamic processes of the oil field, forms TRNE at the final cycle of oil preparation in reservoirs. TRNE negatively affects the efficiency of the oil production and treatment process, and also creates additional disposal costs and environmental payments. In the course of research work, it is necessary to determine the main factors influencing the occurrence of TRNE, select or develop technologies that prevent the formation of TRNE, and develop technologies for the destruction and further processing and disposal of TRNE with a reduction in the negative impact on the environment. Determining the reasons for the formation of TRNE and developing recommendations for its destruction and recycling technologies.
Making decisions before ...
до 16.07.24
Область задачи
Field and well development managementNumber of applications
0
Reducing excess emissions of pollutants into the atmosphere from heating furnaces when burning untreated gas in combustion furnaces and ways to solve this issue.
In the technological process of preparing and transporting oil in the fields, associated oil heaters are used, the main fuel of which is raw associated petroleum gas (not prepared), which leads to the following consequences: - high wear of process equipment and a sharp reduction in MCI due to floating APG parameters and the content of fatty fractions with high combustion temperatures -changes in the composition (fat content) of the gas and its physicochemical properties (moisture content of harmful impurities) lead to an unstable gas combustion system and changes in the parameters of the release of harmful substances into the atmosphere - the use of unprepared APG with floating parameters in composition and chemical properties leads to high energy costs for heating oil, etc. When carrying out inspections by regulatory authorities in the field of ecology, excess emissions of pollutants into the atmosphere from oil heating furnaces are revealed, an increase in emissions of pollutants and greenhouse gases (CO2). To prevent possible violations, it is necessary to develop and implement technical measures to reduce emissions of pollutants and greenhouse gases (emission reduction projects).
Making decisions before ...
до 28.06.24
Область задачи
Labor protection, industrial safety, environmental protection and production operationsNumber of applications
0
